Inteli-Power PD9380V 9300 Series Converter - 80 Amp
Regular price
$510.57 USD
Couldn't load pickup availability
Ready to install and hit the road!
All parts come with the essentials you need for a smooth fit and clear instructions. From performance upgrades to custom styling, unbox and get your ride ready with confidence!
Got questions?
Feel free to get in touch
Inteli-Power PD9380V 9300 Series Converter - 80 Amp
- Input: 105-130 VAC 60 Hz 1300 Watts / Output: 13
- 6 VDC – 14
- 7 VDC, 80 Amps, Green Light (Flooded Lead Acid Mode) - When charging the battery, the converter will sense voltage on the battery and automatically select the proper operating mode to provide the correct charge level to the batteries; If the voltage drops below a preset level the converter will automatically switch to BOOST mode and the output voltage will increase to approximately 14
- 4 VDC to rapidly recharge the battery;, Blue Light (Lithium with 2-Stage Charge Mode) – When charging the battery, the converter has a nominal voltage output of 14
- 4 VDC; When the converter senses an output current drop below a preset level, the converter will automatically switch to IDLE mode and the voltage output will drop to 13
- 6VDC, White Light (AMG Mode) – When charging the battery, the converter has a nominal voltage output of 14
- 0 VDC; After a preset time, the converter will automatically switch to ABSORPTION mode and the voltage output will increase to 14
- 7VDC; When the converter senses an output current drop below a preset level, the converter will automatically switch to FLOAT mode and the voltage output will drop to 13
- 6VDC, Magenta Light (Constant Voltage Mode) - The full rated load is available for load, battery charging or both
- When charging the battery, the converter has a nominal voltage output of 13
- 6 VDC; Caution: Do not store vehicle for extended periods of time in this mode, Caution: DO NOT USE TO RECHARGE FLOODED LEAD/ACID BATTERIES WHILE IN EITHER LITHIUM (BLUE) OR AGM (WHITE) MODE; When the converter senses an output drop below a preset level, the converter will automatically switch to NORMAL mode and the voltage output will drop to 13
- 6VDC
- If there is no significant battery usage for 33 hours the converter will automatically switch to STORAGE mode and the output voltage will drop to 13
- 2 VDC; In storage mode, the output voltage increases to 14
- 4 VDC for approximately 15 minutes every 21 hours to help prevent sulfation of the battery plates;